I put the Negatives in the enlarger. but pulling out this flap thing witha squair whole in it.We put the negatives in teh flap then into a insert place on the little machiean. I turned ona light that made the image show up. Mr. Reeves showed us how to make it lighter or darker while looking at our image before develping it. There was a this on the side that we could make the image move up or down.Then we got a pape that we would test to see how long the light to print the image would be on. On that we tested 4 different light times, we devedped the testing paper, took it out into the normal light to see which ligh time would be the best. Next we got out a special paper out lifted up this big book like thing to place the paper in. This was the paper that our image would be printed on.All lights were off excped for the dark room light. I chose a time. Set the timer, and turned on the timed light. After that we took the paper through the develping steps.
fixer, ect....When that was all done we checked our print to see what came out. Mine was unfotunitly to dark i chose the wrong time light but now i know and have an understanding of what to do.